If you’re looking to Sell Agilent HP E6000A Fiber Mini OTDR Mainframe

Agilent E6000A Mini OTDR Mainframe

The Agilent Mini-OTDR is the best selling product in Agilent’s portfolio of Optical Network Test Solutions for the installation, maintenance and operation of fiber networks.

The Mini-OTDR is designed to provide its users with the fastest tool available for installing and commissioning multiple fiber links and locating faults for fiber maintenance. This is accomplished through high measurement performance and an award winning simple user interface.

Features
* High dynamic range: 40 dB
* Automatic fiber characterization
* Built-in multi-fiber test
* Fiber break locator mode
* Full remote control
* Simple one-button operation
* Context-sensitive on-line help
* Automatic event adjustment
* Front connector check
* Compliant to Bellcore GR-196-CORE trace format
* Stabilized continuous wave (CW) light source
* Minimum sampling resolution: 8cm
* 15 seconds power up cycle
* Small and light

Buying, Selling, Trading Agilent HP E6000A

Characteristics

Horizontal Parameters
* Start-km:
* 0 km to 400 km Span: 0.1 km to 400 km
* Readout resolution: 0.1 m
* Minimum sample spacing: 4 cm
* Refractive index: 1.00000 to 2.00000
* Length unit: km, ft, or miles
* Measurement points: up to 64000

Vertical Parameters
* Vertical scale:
* 0.1 to 10.0 dB/Div Read-out resolution: 0.001 dB
* Reflectance range: 14 dB to 60 dB
* Backscatter coefficient: 10 to 70 dB at 1 s

Storage
* 3.5 floppy disk drive:
* for high density 720/1440 kByte floppy disks. MS-DOS format compatible. Reduced operating temperature of 5C to 45C, with 35% to 80% humidity at 40C. Memory Card: PCMCIA Type II. 440 MB with up to 13000 traces (typical with 64000 data points).
* Internal memory: SRAM up to 2 MB. Up to 300 traces (typical) with 4000 data points

Interfaces

RS232C:
* Maximum transmission rate:
* 115200 bps Transmission time at 115200 bps for trace data: 4000 points at approx. 1 second; 64000 points at approx. 4 seconds.
* Centronics: Standard parallel port (SPP).
* Keyboard: PS2 (Min-DIN). For English Standard, PS2, or AT keyboard.

General
* Automatic setup analysis
* Instrument settings: storage and recall of user-selectable instrument settings.
* Laser safety class: All OTDR laser sources specified by this data sheet are classified as Class 1M according to IEC 60825-1 (2001).

Built-in Applications
* Automatic Multi Fiber Test
* Pass/Fail Test
* Fiber Break Locator
* Power Meter / Loss Test mode 1
* Visual Fault Finder mode 1
* Optical Return Loss
* End to End Loss
* Easy OTDR
* OTDR Training
* OTDR Assistant

Environmental
* Operating Temperature:
* 0 to 50 degees C Storage Temperature: 40 to +60 degrees C
* Humidity: 95% R.H from 0 to 40 degrees C

Power
* AC: 100 240 Vrms
* 10% 50 60 Hz DC: 16 24 V
* External Battery: NiMHtypically 8 hours continuous operation (minimum 4 hours) with Option #006. Charging time < 3 hours, non-operating
* Low battery indicator
* Battery charge status

If you’re selling your Agilent HP E6000A please fill out form on the right hand side of page.

If you’re looking to Sell Agilent N3900A OTDR N3914AL SM Fiber 43dB 1625nm

The Agilent N3900A Modular Network Tester is a portable, lightweight, rugged test platform for the installation, commissioning and maintenance of optical networks. Developed from customer feedback from installation and maintenance (I&M) technicians worldwide, its modular design delivers the measurements you need, when you need them. Snap-on measurement modules meet your test requirements for today’s communications networks; the modular platform protects your investment, and lets you grow into your future measurement needs.

The Modular Network Tester can hold up to three modules to perform OTDR measurements, chromatic dispsersion, polarization mode dispersion or optical spectrum analysis, or a 1×12 Optical Switch module. A video microscope camera can be connected to ensure clean, fast and safe connector inspection as the connector surface picture can be analyzed on the 10.4” display. From the carrying case to the handles and tilt-stand, from the pop-up connector to your choice of interface, attention to detail and to your feedback provide the perfect fit for the way you work.

The Modular Network Tester is powered by a 64Bit RISC® processor architecture with a real-time operating system, VXWorks®, for mission critical operations. Each test engine has its own RISC processing power for ultra fast data acquisition and high accuracy post processing. The Modular Network Tester boots in one minute and all the modules can be hot-swapped – so it’s always ready to work when you are.

Ergonomic design The Modular Network Tester feels like an extension to your arm. It has a hand strap, an ergo grip, and a shoulder strap to work with you and keep your hands free. Attaching a fiber optic connector to a test engine has never been so safe and fast. The pop-up connector can be raised for connection and cleaning purposes and sits securely in the down position, protected by a dust cover while in transit.

The video microscope protects your eyes and speeds up your fiber optic connector cleaning procedures. Flash-card data storage is rugged and secure – there is no internal hard drive to crash. The Toolkit companion software, Toolkit III, prepares acceptance reports the way your customers want them and handles post-processing jobs to free you up for the next task.

Features

• Rugged lightwight and ergonomic design.
• Large, brilliant 10.4″ color display, with touch screen functionality and cursor control.
• USB & LAN ports for connectivity to your PC
• Hot plug modules
• Secure and rugged data storage
• One day battery operating time

Buying, Selling, Trading Agilent N3900A

The Agilent OTDR Module N3914AL works together with the Agilent Modular Network Tester, and are easy to snap on. The OTDR application is uploaded in seconds due to the dynamic software architecture, and allows plug and play operation. Each OTDR test engine has built-in RISC processing power for fast and accurate trace acquisition and data processing. These test engines work in parallel processing mode with other connected test engines, for example, the 1×12 Switch module. All OTDR modules can be shared between multiple users, without the need for any software changes.

• All Done. All Right. After the measurements have been taken the Pass/Fail Test will automatically check for attenuation and insertion and return loss. The new Bending Test will locate both macro and micro bends.
• Easy Connector access and protection. The pop-up connector solves many common problems. For easy access to the optical fiber connection, the pop-up connector is released to the up position, where a fiber can be attached without any obstacles, or the connector cleaned. This also minimizes the risk of scratches to the connector. In the down position with the dust cover closed, the connector stays protected and clean during transit.
• Attach the right connector. Agilent’s universal connector interface allows a large range of standard fiber optic connectors, such as FC/PC, SC, and LC, to be connected to the OTDR port. The connector interfaces are easy to attach, even when working on site, and once removed, the fiber ferrule is easily accessible for cleaning.
• Acceptance Test Done. The companion software, Toolkit III, prepares acceptance reports the way your customers want them, and handles post-processing jobs to free you up for the next task

If you’re selling your Agilent N3900A please fill out form on the right hand side of page.

If you’re looking to Sell Agilent N3900A OTDR With N3900AM Singlemode Module

The Agilent N3900A Modular Network Tester is a portable, lightweight, rugged test platform for the installation, commissioning and maintenance of optical networks. Developed from customer feedback from installation and maintenance (I&M) technicians worldwide, its modular design delivers the measurements you need, when you need them. Snap-on measurement modules meet your test requirements for today’s communications networks; the modular platform protects your investment, and lets you grow into your future measurement needs.

The Modular Network Tester can hold up to three modules to perform OTDR measurements, chromatic dispsersion, polarization mode dispersion or optical spectrum analysis, or a 1×12 Optical Switch module. A video microscope camera can be connected to ensure clean, fast and safe connector inspection as the connector surface picture can be analyzed on the 10.4” display. From the carrying case to the handles and tilt-stand, from the pop-up connector to your choice of interface, attention to detail and to your feedback provide the perfect fit for the way you work.

The Modular Network Tester is powered by a 64Bit RISC® processor architecture with a real-time operating system, VXWorks®, for mission critical operations. Each test engine has its own RISC processing power for ultra fast data acquisition and high accuracy post processing. The Modular Network Tester boots in one minute and all the modules can be hot-swapped – so it’s always ready to work when you are.

Ergonomic design The Modular Network Tester feels like an extension to your arm. It has a hand strap, an ergo grip, and a shoulder strap to work with you and keep your hands free. Attaching a fiber optic connector to a test engine has never been so safe and fast. The pop-up connector can be raised for connection and cleaning purposes and sits securely in the down position, protected by a dust cover while in transit.

The video microscope protects your eyes and speeds up your fiber optic connector cleaning procedures. Flash-card data storage is rugged and secure – there is no internal hard drive to crash. The Toolkit companion software, Toolkit III, prepares acceptance reports the way your customers want them and handles post-processing jobs to free you up for the next task.

Features

– Rugged lightwight and ergonomic design.  – Large, brilliant 10.4″ color display, with touch screen functionality and cursor control.  – USB & LAN ports for connectivity to your PC  – Hot plug modules  – Secure and rugged data storage  – One day battery operating time

Buying, Selling, Trading Agilent N3900A

The Agilent OTDR Module N3910AM works together with the Agilent Modular Network Tester, and are easy to snap on. The OTDR application is uploaded in seconds due to the dynamic software architecture, and allows plug and play operation. Each OTDR test engine has built-in RISC processing power for fast and accurate trace acquisition and data processing. These test engines work in parallel processing mode with other connected test engines, for example, the 1×12 Switch module. All OTDR modules can be shared between multiple users, without the need for any software changes.

– All Done. All Right. After the measurements have been taken the Pass/Fail Test will automatically check for attenuation and insertion and return loss. The new Bending Test will locate both macro and micro bends.  – Easy Connector access and protection. The pop-up connector solves many common problems. For easy access to the optical fiber connection, the pop-up connector is released to the up position, where a fiber can be attached without any obstacles, or the connector cleaned. This also minimizes the risk of scratches to the connector. In the down position with the dust cover closed, the connector stays protected and clean during transit.  – Attach the right connector. Agilent’s universal connector interface allows a large range of standard fiber optic connectors, such as FC/PC, SC, and LC, to be connected to the OTDR port. The connector interfaces are easy to attach, even when working on site, and once removed, the fiber ferrule is easily accessible for cleaning.  – Acceptance Test Done. The companion software, Toolkit III, prepares acceptance reports the way your customers want them, and handles post-processing jobs to free you up for the next task

If you’re selling your Agilent N3900A please fill out form on the right hand side of page.