If you’re looking to Sell NOYES OFL 100-HR AC Adapter for Noyes OFL 100-HR
New replacement AC power adapter for your Noyes OFL 100-HR.
Buying, Selling, Trading NOYES OFL 100-HR
If you’re selling your NOYES OFL 100-HR please fill out form on the right hand side of page.
If you’re looking to Sell NOYES M600 AC Adapter for Noyes M600 Mini OTDR
New replacement AC power adapter for your Noyes M600 Mini OTDR.
Buying, Selling, Trading NOYES M600
If you’re selling your NOYES M600 please fill out form on the right hand side of page.
If you’re looking to Sell NOYES M600 Mini OTDR Replacement Battery Pack
Our NEW Battery Packs are made from the finest cells and parts. They are designed to meet or exceed the original equipment specifications for your Noyes M600 Mini OTDR.
Buying, Selling, Trading NOYES M600
If you’re selling your NOYES M600 please fill out form on the right hand side of page.
If you’re looking to Sell NOYES OFL-100 LR SM Fiber Optic OTDR
Noyes OFL 100 LR SingleMode OTDR
The OFL 100 is designed to be a rugged, reliable, portable test instrument having the many features required to measure and maintain fiber optic networks. Its’ easy “one button” operation provides event location, length measurements, splice loss measurements, and trace documentation. This instrument utilizes standard OTDR (Optical Time Domain Reflectometer) technology to make measurements. When used with an optional thermal printer or with the PCPLOT3 software it will provide complete fiber network documentation and trace analysis.
Using standard optical time domain reflectometer (OTDR) techniques, the OFL 100 transmits a short pulse of light down the optical fiber and examines the reflections coming back. The reflections are known as backscatter. The OFL 100 interprets these reflections and determines event losses, distances and the fiber end. Optical time domain reflectometry allows the user to identify problems on a system while having access to only one end of the fiber.
Event Location
The OFL 100 can be used to automatically locate events using the SCAN command, or manually by using the PCPLOT3 software. Each event location will be displayed along with the event magnitude measured in dB.
End Detection
The OFL 100 can be used to measure the length of an installed cable. It is also useful to verify cable lengths prior to installation.
Fiber Trace Documentation
The OFL 100 provides OTDR trace documentation via the serial port. Direct plotting of traces is possible by connecting a thermal printer. The OFL 100 can be connected to a personal computer for computer storage of traces.
Buying, Selling, Trading NOYES OFL-100
If you’re selling your NOYES OFL-100 please fill out form on the right hand side of page.
If you’re looking to Sell NOYES M200 K-MM MultiMode Fiber OTDR
M200 Handheld OTDR
The Noyes M200 from AFL Telecommunications offers unmatched OTDR capabilities in a handheld package weighing less than 1 kg (2 lb). Multimode, Single-mode, and ‘Quad’ wavelength models are offered. With short dead zone and intermediate range specifications, the M200 is ideal for Tier 2 testing of premises (building and campus) networks or certification and troubleshooting of FTTX PON networks. And its bright, transflective display makes it suitable for both indoor and outdoor operation.
The M200 is based on a new hardware/software platform that supports automatic and manual setup, precision event analysis, dual-wavelength testing, rich file naming and folder setup, 6-hour battery life, internal and removable media data storage, and USB connectivity. Test ports are equipped with tool-free adapters, which can be changed in seconds. A custom-designed polycarbonate case and shock-absorbing boot make it our most rugged OTDR ever.
Results are saved as industry standard .SOR files, which can be viewed, printed, and analyzed on a PC using free-ware available to you and your customers (go to www.afltele. com to download). Unit firmware, user settings, and test results are saved in non-volatile memory. Thus the M200 may be stored with battery removed for an extended period of time and still be up and running in seconds when needed.
New Feature
USB Host Port offers a new convenient way to transfer data from the M200 to a PC. By using a standard USB Flash Drive to transfer traces, the user no longer needs a USB Cable, ActiveSync or a Compact Flash reader. Using the Tools in the M200 File Manager, one or more folders or files can be copied to a USB Flash Drive for transfer to a PC. Thousands of files will fit on a 64 MB or larger USB Flash Drive.
Features
Applications
Buying, Selling, Trading NOYES M200
If you’re selling your NOYES M200 please fill out form on the right hand side of page.
If you’re looking to Sell NOYES 460-M600 MM/SM Network Simulator
Noyes 460-M600-MM/SM Network Simulator
Buying, Selling, Trading NOYES 460-M600
The Noyes’ network simulators can be custom designed modules for duplicating an installed fiber optic facility and are rugged, field portable, for use in training schools, laboratory bench design, and field troubleshooting. They are fully characterized for loss, attenuation/km, and splice location/value.
If you’re selling your NOYES 460-M600 please fill out form on the right hand side of page.
If you’re looking to Sell NOYES OFL 200 SM Fiber OTDR w/ VFL Option
The OFL 200 OTDR sets new standards for size, weight, ease-of-use, and value in a telco/broadband OTDR. Smaller than many optical loss test sets, the OFL 200 has the range, features, and price to make it the perfect OTDR for outside plant crews installing and maintaining optical fiber cables in broadband, metro, access, and FTTH networks. Unlike ‘optical fault locators’, which detect only reflective events, the OFL 200 is a true OTDR, which detects fiber backscatter as well as fresnel reflections. Thus, the OFL 200 can locate reflective and non-reflective breaks, including those caused by crushed fibers. In addition, the OFL 200 provides an integrated 650 nm visual fault locator (VFL) for shortdistance troubleshooting and fiber tracing.
In its [Full Auto] mode, the OFL 200 measures fiber length and sets range, pulse width, and averaging time automatically. [Full Auto] mode is ideal for operators not familiar with OTDRs. [Semi Auto] mode allows the user to set range while the OFL 200 sets all other parameters. [Manual] mode is available for experienced users. [Live] mode is provided for first connector checking and troubleshooting.
The fast change switchable adapter allows the OTDR to interface launch cables with a variety of connector styles. The OFL 200 can internally store up to 48 traces. Using the supplied serial cable, saved traces can be transferred to a PC for archiving, printing, and analyzing with the supplied Trace600 Windows® software. Test results are stored in Bellcore [*.sor] GR-196 Version 1.1 format.
Buying, Selling, Trading NOYES OFL 200
Features & Applications:
Rugged, handheld, lightweight
Designed for field use
1550 or 1625 nm single-mode OTDR
Locates reflective and non-reflective breaks
Built-in 650 nm visual fault locator (VFL) with universal adapter
Switchable OTDR port adapter
Cursor and zoom controls to measure event loss, reflectance, and location
Automatic, semi-automatic, and manual setup modes
Launch level connection quality indicator
Large LCD with Backlight
Free Windows® compatible software to view, print, and archive test records
Rechargeable NiMH battery pack, AC adapter, or optional AA alkaline
Wide temperature range: -10 to + 50°C
Specifications:
Emitter type Laser
Safety class Class I, FDA 21 CFR 1040.10 & 1040.11
Center wavelength (nominal) 1550 nm 1625 nm
Dynamic range (SNR = 1) 24 dB @ 10 µs, 3 min. test 23 dB @ 10 µs, 3 min. test
Maximum fi ber length 70 km
Event dead zone 2 m typical / 3 m maximum
Attenuation dead zone 14 m typical / 18 m maximum
Number of data points 4000 on ranges > 4 km
Resolution 1 m on ranges > 4 km; Range / 4,000 on ranges > 4 km
If you’re selling your NOYES OFL 200 please fill out form on the right hand side of page.
If you’re looking to Sell NOYES OFL 280-103 SM OTDR w/ VFL PM
Noyes OFL 280-103
OFL280-103 triple-wavelength model adds ServiceSafe™ live fiber detection with integrated PON Power Meter. Configuration is simple with the following functions provided from a single test port:
Certify dark PON and point-to-point networks at 1310/1550 nm
Perform high-resolution fault-location of dark or live FTTx PONs at 1625 nm
Measure FTTx power levels at 1490 and 1550 nm
OFL280-103 Fiber Testing Applications:
Point-to-point cable construction and troubleshooting
Fiber loss, splice/connection loss and reflectance, fault-location
FTTx PON construction
Fiber loss, splitter loss and reflectance, splice or connection loss and reflectance, fault-location 1
FTTx customer fiber troubleshooting – dark fibers (hard faults)
Locate cable cuts, open splices, and bad connections
Features
Applications
Buying, Selling, Trading NOYES OFL 280-103
If you’re selling your NOYES OFL 280-103 please fill out form on the right hand side of page.
If you’re looking to Sell NOYES M210 QUAD SM MM Fiber OTDR w/ PM VFL
M210 Hand-held OTDR with OPM, VFL, & Touch and Test® Intuitive User Interface
NOYES M210 OTDR from AFL combines ease of use (Touch and Test®) and multi-functionality in a field rugged, hand-held package. Integrated OTDR and OPM functionality and inspection capability reduce setup and testing time and simplify documentation; reducing testing and administration costs.
With single-mode dynamic ranges of up to 30 dB and multimode dynamic ranges of 26 dB, the M210 is ideal for testing, troubleshooting and documenting enterprise, LAN/WAN, campus and military single-mode and multimode (62.5 and 50 micron) fiber networks.
The latest member of the NOYES M200 product family combines market proven reliability with expanded capabilities. Launched in 2006, the M200 is a 2012 Test of Time finalist, and used by thousands of AFL customers.
M210 Multifunction OTDR Features:
Built in Optical Power Meter – Easily test and store both Tier 1 and Tier 2 results in one tester
Built in Visual Fault Locator (VFL) enables technicians to quickly identify fiber faults within OTDR dead zone
Dynamic Range covers longer fiber systems
30 dB Single-mode
26 dB Multimode
Field proven, compact, rugged product packaging is designed for both outside plant use and cramped inside plant environments.
M210 Touch and Test® supports users of all levels
Full Auto Mode – Connect and press test. M210 will detect fiber and set recommended test parameters. Perfect for novice technicians or repair techs quickly looking for faults on fiber spans of unknown length.
Auto-Once Mode – Designed for testing cables with multiple fibers. M210 performs a full auto test on the first fiber and retains recommended settings allowing fast expert-speed testing of subsequent fibers.
Expert Mode – Provides access to testing parameters for experienced users to setup optimal testing scenarios for specific networks.
Real-Time Mode – Continuous OTDR operation and display update allows users to dynamically change networks while monitoring OTDR trace results. Example: relaxing fiber bends to reduce attenuation loss.
Top menu level touch screen access to major test modes allow users to test networks faster- no time wasted with complicated menu structures. The M210 provides one-touch access to OTDR and OPM test modes and DFS inspection mode when enabled.
M210 Touch and Test® Features
Set Pass/Fail thresholds compliant with TIA/ISO/user-defined values to alert test operators of failing or marginal events.
New Job creation editor with detailed job/file naming allows users to quickly create file for storing results with flexibility for custom Job, Route, Cable, Fiber file naming.
Structured file management to logically and easily store test results.
Results Manager allows in-unit review saved test results and quick selection of previously created jobs for storing current job test results.
Access general settings including Date/Time/Number format options and an Auto Off feature.
OTDR settings enhanced event measurements with various manual LSA methods available in Expert mode.
A simple toggle function enables fast and logical storage of trace, Loss and inspection results from both ends of a fiber/cable.
The M210 supports visual inspection per IEC 61300-3-5 visual inspection practices using a NOYES DFS1 Digital FiberScope providing the user the ability to view and document connector end-face images with their OTDR traces and loss/power measurements
Touch and Test® capabilities simplify the user experience; reduce training time and testing errors enabling even novices to get the job done quickly and accurately.
Buying, Selling, Trading NOYES M210
Specifications
OTDR MULTIMODE SINGLE-MODE
Emitter Type Laser Laser
Safety Class Class I FDA 21 CFR 1040.10 and 1040.11; IEC 60825-1:2007-03 Class I FDA 21 CFR 1040.10 and 1040.11; IEC 60825-1:2007-03
Center Wavelengths 850/1300 nm 1310/1550 nm
Wavelength Tolerance ±20/±30 nm ±20/±30 nm
Dynamic Range (SNR = 1) 26 dB 30 dB
Event Dead Zone 1.5 m 1.5 m
Attenuation Dead Zone 9 m 9 m
Pulse Widths 10, 30, 100, 300 ns, 1 µs, 3 µs 10, 30, 100, 300 ns, 1, 3, 10 µs
Range Settings 250 m to 32 km 250 m to 208 km
Sampling Points Up to 16,000 Up to 16,000
Minimum Data Point Spacing 0.25 m 0.25 m
Group Index of Refraction (GIR) 1.4000 to 1.6000 1.4000 to 1.6000
Distance Uncertainty/Accuracy ±(1 + 0.005 % x distance + data point spacing) ±(1 + 0.005 % x distance + data point spacing)
Linearity ±0.05 dB/dB ±0.05 dB/dB
Loss Threshold 0.02 dB 0.02 dB
Loss Resolution 0.01 dB 0.01 dB
Reflectance Resolution 0.01 dB 0.01 dB
Reflectance Accuracy ±2 dB ±2 dB
Real Time Refresh Rate 1 Hz 1 Hz
Units m, km, ft, kft, mi
OTDR Modes Full Auto, Expert, Real-Time
Trace File Format Bellcore GR-196 Version 1.1
Trace File Storage Medium Internal and USB
Trace File Storage Capacity >1000 internal, 1000s on USB
Trace File Transfer to PC USB
If you’re selling your NOYES M210 please fill out form on the right hand side of page.
If you’re looking to Sell NOYES OFL 280-100 SM OTDR w/ VFL PM
OFL280-100 provides the best balance of functions and value for many users. Dual-wavelength testing at 1310 and 1550 nm is normally sufficient to certify point-to-point or FTTx (PON) networks and detect macro bends.
OFL280-100 Main Features:
OFL280-100 Fiber Testing Applications:
Point-to-point cable construction and troubleshooting
Fiber loss, splice/connection loss and reflectance, fault-location
FTTx PON construction
Fiber loss, splitter loss and reflectance, splice or connection loss and reflectance, fault-location 1
FTTx customer fiber troubleshooting – dark fibers (hard faults)
Locate cable cuts, open splices, and bad connections
Features
Applications
Buying, Selling, Trading NOYES OFL 280-100
If you’re selling your NOYES OFL 280-100 please fill out form on the right hand side of page.