If you’re looking to Sell Anritsu MT9081D SM ACCESS OTDR 1310nm 1550nm

The MT9080 Series ACCESS Master is provided with the functions that are required to perform diagnosis of optical fibers fault on optical fiber lines, specifically FTTH lines.

 

<1> Optical Pulse Testing (OTDR)

Capable of measuring the connection loss, fiber loss, and distance of an optical fiber line. You can find the fault position of a breakage. This function works in two modes: Fault Locate and Trace Analysis. In both modes, the function automatically detects event positions such as splice points with loss exceeding the preset threshold or return loss, and lists the data in an event table. In the Fault Locate mode, possible fault points of the detected events are also listed at the upper right corner of the screen

 

 

<2> Optical Power Meter (OPM)

Capable of measuring the optical power level. By measuring the communication light power level in the customer’s system, you can easily decide whether the fault point is on the optical fiber or network.

 

 

<3> Optical Light Source (OLS) for Fiber identification

Available as the light source for fiber identification equipment (ID tester). CW light or modulation light of 270 Hz/1 kHz/2 kHz is output. (CW light is available for the MT9081x only.)

 

 

<4> Visible Light Source (VLD)

Works as the visible light source by means of a red laser diode. Available for visual fiber identification by visual means, fiber identification by bending, detection of breaking points within the OTDR dead zone, and other purposes.

 

 

<5> IP Network Connectivity

Check Function PPPoE connection check, Ping test, trace route test, download throughput measurement, throughput measurement, and counter measurement are available by connecting to an Ethernet interface (10/100/1000Base-T) such as ONU. Refer to the MT9080 Series ACCESS Master IP Network Connectivity Check Function Operation Manual for details.

 

Visible Light Source (Option 002)

Allows you to get visual information about faults in the optical fiber.

 

IP Network Connectivity Check Function (Option 001)

Allows you to check connectivity with the network

 

Key Character Displays (Option 009 English)

These designate the language in which characters are represented on the key panel.

 

Protector (Option 010)

Useful for outdoor use.  Provides a protective cover on the front panel and shoulder cover.

 

 

Gigabit Ethernet Upgrade (Option 011)

10BASE-T/100BASE-TX/1000BASE-T : 1 port

 

Buying, Selling, Trading Anritsu MT9081D

If you’re selling your Anritsu MT9081D please fill out form on the right hand side of page.