If you’re looking to Sell Anritsu MW9070B SM MM Fiber OTDR MW0972B MW0975J

The MW9070B is a high-performance mini-OTDR for installation and maintenance of subscriber fiber optic lines and other fiber optic cables. It automatically detects the positions of faults in the cable and displays an event table listing faults and a trace waveform. The high-performance mini-OTDR has a large 7″ screen while staying within the size of a B5 file and weighing in at only 3.2 kg.

The MW9070B is designed with a wide dynamic range and short dead zone and is indispensable for detecting faults in optical trunk lines, subscriber lines, optical CATV cables, optical LANs, and other types of fiber optic cables. In addition, it is also invaluable in measuring transmission line losses, connection losses, return loss, and other parameters. Six optical units are available, depending on the wavelength and type of optical fiber, making the MW9070B an economic choice for a wide range of applications.

Features

Compact (smaller than footprint), lightweight (3.2 kg)
Simple operation with automated fault measurement
Simultaneous waveform trace and event table display on large LCD
Built-in 3.5 inch FDD (optional)
Wide dynamic range: 41.5/39.5 dB (MW0972C)
Short dead zone (MW0972C): 3 m (fresnel), 8 m (back-scattered)
High-speed real-time sweep to check fiber connections
Manual operation for novice and experienced operation
Visual LD light source (option for units)
Emulation software runs on any personal computer under Windows environment (sold separately)
There are both Singlemode and Multimode Optical Units available

MW0972B Specifications:

Buying, Selling, Trading Anritsu MW9070B

Fiber     10/125 µm SM fiber *ITU-T G.652
Center wavelength     1310/1550 ±30 nm (typical: ±15/20 nm)
Optical connector     FC, ST, DIN, SC, DIAMOND (HMS-10/A)
Distance range (km)     5, 10, 25, 50, 100, 200
Pulse width (ns)     20, 50, 100, 500, 1000, 2000, 4000, 10000
Dynamic range (S/N=1)     36 dB at 1.31 µm 34 dB at 1.55 µm
Measurement range     22 dB at 1.31 µm (typical: 25 dB), 20 dB at 1.55 µm (typical: 23 dB)
Dead zone Fresnel reflection     5 m
Dead zone Back-scattered light     25 m
Marker-resolution     1 m (at 5 km range)
Accuracy     Distance measurements: ±2 m ± (10–4 x distance) ±marker resolution *Excluding uncertainly caused by fiber IOR Loss measurements (linearity): ±0.05 dB/dB or 0.1 dB (whichever greater) Return loss measurements: ±4 dB
Measurement time     180 s max. (auto-measurement mode)
Real-time sweep     0.4 s
Dimensions     290 (W) x 120 (H) x 35 (D) mm
Safety     Laser: 21CFR Class 1, IEC Class 1

MW0975J Specifications:
Fiber     62.5/125 µm multimode fiber
Center wavelength     850 ±30 nm 1300 ±30 nm
Optical connector     FC, ST, DIN, SC, DIAMOND (HFS-13/A)
Distance range (km)     5, 10, 25, 50, 100
Pulse width (ns)     20, 50, 100, 500 (500 ns is added to only 1300 nm wavelength)
Dynamic range (S/N=1)     18 dB 18 dB
Measurement range     10 dB
Dead Zone Fresnel reflection     6 m
Dead Zone Back-scattered light     15 m
Marker-resolution     1 m (at 5 km range)
Measurement time     Distance measurements: ±2 m ± (10–4 x distance) ±marker resolution *Excluding uncertainly caused by fiber IOR Loss measurements (linearity): ±0.05 dB/dB or 0.1 dB (whichever greater) Return loss measurements: ±4 dB
Accuracy     180 s max. (auto-measurement mode)
Real-time sweep     1.0 s
Dimensions     290 (W) x 120 (H) x 35 (D) mm
Safety     Laser: 21CFR Class 1, IEC Class 1

If you’re selling your Anritsu MW9070B please fill out form on the right hand side of page.

If you’re looking to Sell Anritsu MW9070A SM MM Fiber OTDR MW0972A MW9073J

The MW9070A is a high-performance mini-OTDR for installation and maintenance of subscriber fiber optic lines and other fiber optic cables. It automatically detects the positions of faults in the cable and displays an event table listing faults and a trace waveform. The high-performance mini-OTDR has a large 7″ screen while staying within the size of a B5 file and weighing in at only 3.2 kg. The MW9070A is designed with a dynamic range and short dead zone and is indispensable for detecting faults in optical trunk lines, subscriber lines, optical CATV cables, optical LANs, and other types of fiber optic cables. In addition, it is also invaluable in measuring transmission line losses, connection losses, return loss, and other parameters. Six optical units are available(OPTIONAL)depending on the wavelength and type of optical fiber, making the MW9070A an economic choice for a wide range of applications. FEATURES AND BENEFITS :

Compact (smaller than footprint) & lightweight (3.2 kg).
Simple operation with automated fault measurement.
Simultaneous waveform trace and event table display on large LCD.
Built-in 3.5 inch FDD.

Buying, Selling, Trading Anritsu MW9070A

MW0972A Speciifcations:
Fiber      10/125 µm SM fiber *ITU-T G.652
Center wavelength      1310/1550 ±30 nm*1
Optical connector      FC, ST, DIN, SC, DIAMOND (HMS-10/A)*2 *Replaceable and cleanable (all PC type)
Distance range (km)      5, 10, 25, 50, 100, 200 (200 km is added to only MW0970B/0972B)
Pulse width (ns)      20, 50, 100, 500, 1000, 2000, 4000, 10000 (4000/10000 ns are added to only MW0970B/0972B)
Dynamic range (S/N=1)      23 dB at 1.31 µm*3 (typical: 25.5 dB), 20.5 dB at 1.55 µm*3 (typical: 22.5 dB)
Measurement range*5      15.5 dB at 1.31 µm*3 (typical: 18 dB), 13 dB at 1.55 µm*3 (typical: 15 dB)

MW0973J Speciifcations:

Fiber     62.5/125 µm multimode fiber
Center wavelength     850 ±30 nm
Optical connector     FC, ST, DIN, SC, DIAMOND (HFS-13/A)
Distance range (km)     5, 10, 25, 50, 100
Pulse width (ns)     20, 50, 100, 500 (500 ns is added to only 1300 nm wavelength)
Dynamic range (S/N=1)     18 dB
Measurement range     10 dB
Dead Zone Fresnel reflection     6 m
Dead Zone Back-scattered light     15 m
Marker-resolution     1 m (at 5 km range)
Measurement time     Distance measurements: ±2 m ± (10–4 x distance) ±marker resolution *Excluding uncertainly caused by fiber IOR Loss measurements (linearity): ±0.05 dB/dB or 0.1 dB (whichever greater) Return loss measurements: ±4 dB
Accuracy     180 s max. (auto-measurement mode)
Real-time sweep     1.0 s
Dimensions     290 (W) x 120 (H) x 35 (D) mm
Safety     Laser: 21CFR Class 1, IEC Class 1

If you’re selling your Anritsu MW9070A please fill out form on the right hand side of page.

If you’re looking to Sell Anritsu MW9070A SM Fiber OTDR MW0972A

The MW9070A is a high-performance mini-OTDR for installation and maintenance of subscriber fiber optic lines and other fiber optic cables. It automatically detects the positions of faults in the cable and displays an event table listing faults and a trace waveform. The high-performance mini-OTDR has a large 7″ screen while staying within the size of a B5 file and weighing in at only 3.2 kg.

The MW9070A is designed with a dynamic range and short dead zone and is indispensable for detecting faults in optical trunk lines, subscriber lines, optical CATV cables, optical LANs, and other types of fiber optic cables. In addition, it is also invaluable in measuring transmission line losses, connection losses, return loss, and other parameters. Six optical units are available(OPTIONAL)depending on the wavelength and type of optical fiber, making the MW9070A an economic choice for a wide range of applications.

FEATURES AND BENEFITS :

• Compact (smaller than footprint) & lightweight (3.2 kg).
• Simple operation with automated fault measurement.
• Simultaneous waveform trace and event table display on large LCD.
• Built-in 3.5 inch FDD.

Buying, Selling, Trading Anritsu MW9070A

If you’re selling your Anritsu MW9070A please fill out form on the right hand side of page.

If you’re looking to Sell Nettest CMA5000 SM MM Fiber OTDR

The CMA5000 is one of the most modular and flexible field service offerings from Anritsu.  Test Gigabit Ethernet, DWDM, SONET, OTDR, ORL, PMD and CD all with the same easy-to-use instrument
The CMA5000 is a field portable, network testing platform designed for installation, maintenance and troubleshooting of next generation, convergence networks. It features a common user interface, open architecture design and numerous test technologies that allow the platform to evolve with user testing needs and address ever-changing telecommunication infrastructures.

Comprehensive physical layer characterization is simplified with all required testing applications including OTDR, Optical Spectrum Analysis, Loss Test Set and Optical Return Loss. Supplemental tools such as a Visual Fault Locator and Video Inspection Probe are also available providing a complete testing solution. As services are deployed, the CMA5000 expands to certify performance of Gigabit Ethernet and SONET/SDH networks up to 10Gb/s.

Why choose the CMA5000?

Common platform supports all the tools needed for:

• Fiber installation and maintenance
• Rapid isolation of network problems
• In-depth analysis and monitoring of network performance

It combines Best-in-Class performance with:

•  Exceptional ease-of-use
  -Accurate results with little or no training
• Common feature set across different test applications
  – Leads to greater productivity
• One button tests that speed troubleshooting
  – Faster time to restore service
• Multi-layer test capability
  – Quickly isolate and resolve complex network problems

CMA5000 provides significant advantages:

• The CMA5000 reduces the total cost of measurement
  – Common platform reduces the number of “boxes” needed to perform routine and emergency testing
  – Common user interfaces reduces training required for effective use of different applications
• The CMA5000 provides increased customer revenue
  – Simple bandwidth utilization monitoring leads to network optimization
  – Fast, efficient testing enables rapid restoration of existing services and quicker deployment of new ones
• Simple Go/NoGo tests are always backed up with detailed data for manual analysis

Even though the unit is simple for the novice, the experienced users can drill down to get more in-depth results

Today’s telecommunication professionals are faced with unprecedented challenges ranging from accelerating the deployment of highspeed communications services to reducing costs, including capital expenditures. NetTest answers these challenges with the CMA 5000 Multi-Layer Network Test Platform.

The CMA 5000 is the industry’s premier test and measurement solution designed with the high performance and scalability necessary to meet the stringent demands of telecommunication professionals while simultaneously accelerating the deployment of new services and reducing the total cost of measurement.

Reduce the Total Cost of Measurement
One platform providing complete testing solutions for multiple network layers saves time by minimizing training, increasing user efficiency, reducing equipment inventory, and decreasing test time via best-in-breed specifications – reducing the total cost of measurement.

Accelerate the Deployment of Services
Unparalleled performance for all applications allows networks to be characterized and commissioned faster than the competition, thereby providing accelerated time to revenue.

Optimize Performance and Bandwidth
The CMA 5000 fully characterizes each fiber and network for maximum performance and revenue generation.

Buying, Selling, Trading Nettest CMA5000

If you’re selling your Nettest CMA5000 please fill out form on the right hand side of page.

If you’re looking to Sell Anritsu MW9076B1 Singlemode Fiber OTDR MU250000A

The new MW9076 mini-OTDR series can perform a measurement three to five times faster than the well received, conventional MW9070B. Three and four-wavelength OTDRs are included among the new product lineup. The four-wavelength OTDR can measure the chromatic dispersion characteristics from one end of an optical fiber. Two types of color displays with high resolution (5cm) and many sampling points (50000 points) are available for indoor and outdoor use. The MW9076 series shows superior basic performance that enables a wide dynamic range and a short dead zone. It supports the construction and maintenance of the optical fiber cables. Moreover, using this OTDR, it is possible not only to quickly charge a lithium-ion battery but also to indicate the remaining battery charge.

Buying, Selling, Trading Anritsu MW9076B1

Features

• 40.5/38.5 dB high dynamic range
• Short 8 m dead zone
• Simple measurement of chromatic dispersion from one end of an optical fiber
• Measurement in 10 s (Full-Auto mode), 0.15 s real-time sweep
• 5 cm high resolution, 50,000 sampling points
• 8.4 inch TFT-LCD color display

If you’re selling your Anritsu MW9076B1 please fill out form on the right hand side of page.

If you’re looking to Sell Anritsu MW9070B MW0972B SM Fiber OTDR

The MW9070B is a high-performance mini-OTDR for installation and maintenance of subscriber fiber optic lines and other fiber optic cables. It automatically detects the positions of faults in the cable and displays an event table listing faults and a trace waveform. The high-performance mini-OTDR has a large 7″ screen while staying within the size of a B5 file and weighing in at only 3.2 kg.

The MW9070B is designed with a wide dynamic range and short dead zone and is indispensable for detecting faults in optical trunk lines, subscriber lines, optical CATV cables, optical LANs, and other types of fiber optic cables. In addition, it is also invaluable in measuring transmission line losses, connection losses, return loss, and other parameters. Six optical units are available, depending on the wavelength and type of optical fiber, making the MW9070B an economic choice for a wide range of applications.

Features

• Compact (smaller than footprint), lightweight (3.2 kg)
• Simple operation with automated fault measurement
• Simultaneous waveform trace and event table display on large LCD
• Built-in 3.5 inch FDD (optional)
• Wide dynamic range: 41.5/39.5 dB (MW0972C)
• Short dead zone (MW0972C): 3 m (fresnel), 8 m (back-scattered)
• High-speed real-time sweep to check fiber connections
• Manual operation for novice and experienced operation
• Visual LD light source (option for units)
• Emulation software runs on any personal computer under Windows environment (sold separately)
• There are both Singlemode and Multimode Optical Units available

Buying, Selling, Trading Anritsu MW9070B

If you’re selling your Anritsu MW9070B please fill out form on the right hand side of page.

If you’re looking to Sell Anritsu MW9070B Mini OTDR W/ MultiMode 850nm

Anritsu MW9070B With Multimode Mode OTDR Module 850nm Only

The MW9070B is a high-performance mini-OTDR for installation and maintenance of subscriber fiber optic lines and other fiber optic cables. It automatically detects the positions of faults in the cable and displays an event table listing faults and a trace waveform. The high-performance mini-OTDR has a large 7″ screen while staying within the size of a B5 file and weighing in at only 3.2 kg.

The MW9070B is designed with a wide dynamic range and short dead zone and is indispensable for detecting faults in optical trunk lines, subscriber lines, optical CATV cables, optical LANs, and other types of fiber optic cables. In addition, it is also invaluable in measuring transmission line losses, connection losses, return loss, and other parameters. Six optical units are available, depending on the wavelength and type of optical fiber, making the MW9070B an economic choice for a wide range of applications.

Buying, Selling, Trading Anritsu MW9070B

Features & Benefits

* Compact (smaller than footprint), lightweight (3.2 kg)
* Simple operation with automated fault measurement
* Simultaneous waveform trace and event table display on large LCD
* Built-in 3.5 inch FDD (optional)
* Wide dynamic range: 41.5/39.5 dB (MW0972C)
* Short dead zone (MW0972C): 3 m (fresnel), 8 m (back-scattered)
* High-speed real-time sweep to check fiber connections
* Manual operation for novice and experienced operation
* Visual LD light source (option for units)
* Emulation software runs on any personal computer under Windows environment (sold separately)
* There are both Singlemode and Multimode Optical Units available
* Light source & power meter function (MW0972C optical power meter: Option)

If you’re selling your Anritsu MW9070B please fill out form on the right hand side of page.

If you’re looking to Sell Anritsu MW9076K MW9076K OTDR SM MM

Anritsu SM MM Optical Time Domain Reflectometer – with SINGLEMODE 1310nm / 1550nm MW9076B1 Unit Module and MULTIMODE 850nm / 1300nm MW9076K Unit Module – all in LIKE NEW CONDITION!

The MW9076B1 is a general purpose OTDR module used for mid-distance SM optical fiber installation and maintenance. Wavelength:1.31/1.55 µm, Dynamic Range: 40.5/38.5 dB (typical), Dead Zone: 1.6/8 m.   REQUIRES DISPLAY UNIT (MU250000A OR MU250000A4).  INCLUDED – SEE ACCESORIES BELOW !

The new MW9076 mini-OTDR series can perform a measurement three to five times faster than the well received, conventional MW9070B. Three and four-wavelength OTDRs are included among the new product lineup. The four-wavelength OTDR can measure the chromatic dispersion characteristics from one end of an optical fiber. Two types of color displays with high resolution (5cm) and many sampling points (50000 points) are available for indoor and outdoor use. The MW9076 series shows superior basic performance that enables a wide dynamic range and a short dead zone. It supports the construction and maintenance of the optical fiber cables. Moreover, using this OTDR, it is possible not only to quickly charge a lithium-ion battery but also to indicate the remaining battery charge.

The MW9076K is a high performance OTDR Unit Module and is used for GI fiber and supports dual wavelengths.

Buying, Selling, Trading Anritsu MW9076K

FEATURES :

• Wavelength:.85/1.3µm – 30nm.
• Dynamic Range: 21/25dB (typical).
• Dead Zone: 2/7m.
• Simple measurement of chromatic dispersion from one end of an optical fiber.
• Measurement in 10 s (Full-Auto mode), 0.15 s real-time sweep.
• 5 cm high resolution, 50,000 sampling points.
• 8.4 inch TFT-LCD color display.
• Offers superior cost performance.

If you’re selling your Anritsu MW9076K please fill out form on the right hand side of page.

If you’re looking to Sell Anritsu MW9076D SM Fiber Optic OTDR
The Anritsu MW9076 series is a small and lightweight optical time domain reflectometer (mini-OTDR) for measuring loss and locating faults in optical fiber cables at fiber installation and maintenance. It has excellent basic performance specifications including a dynamic range of 45 dB and a world-beating backscatter dead zone of just 8 m. For the best price performance, the series includes four types of main frame, two types of optical channel selector unit and two types of display unit.

Features

• 8 m short dead zone
• Simple measurement of chromatic dispersion from one end of optical fiber
• Measurement in 10 s (Full-Auto mode), 0.15 s real-time sweep
• 5 cm high resolution, 50,000 sampling points
• 8.4 inch TFT-LCD color display

High dynamic rangePerformance and Functions

• When using a wavelength of 1.55 µm, a point about 190 km distant can be measured.
• Short dead zone
  Clearly measure up to near end by 8 m dead zone (back-scatter, SM unit)
• Chromatic dispersion measurement
  The MW9076D has a built-in function for measuring chromatic dispersion even outdoors. The chromatic dispersion can be measured automatically over a wide range from 1300 to 1660 nm from one end of the fiber. The dispersion reproducibility is ±0.05 ps/(nm · km)* and the dynamic range is 30 dB. The MW9076D can be operated from an external PC using remote commands to measure the chromatic dispersion. For detail of the chromatic dispersion measurement, refer to the document of “product introduction MW9076 series Optical Time Domain Reflectometer”.
  *: Measured with 25 km of 1.3 µm zero-dispersion fiber (ITU-T G.652) at 1550 nm.
• Fresnel reflection
  The far-end Fresnel reflection can be measured for four wavelengths (1310/1450/1550/1625 nm).
• Group delay characteristics
  The fitting formula supports cubic or quintic Sellmeier, and polynomials can be applied to various types of fibers.
• Chromatic dispersion characteristics
  The zero and total dispersion can be displayed along with the delay, dispersion and dispersion slope at 0.1 nm steps.
• High-speed measurement
  It takes only 10 seconds to measure and display the waveform and connection loss on one screen. Just one press of the Start key is all that is needed to make measurement.
• Full automatic mode
  Measurement results are displayed by simply pressing the Start key. All complicated settings of distance range, pulse width, attenuator, and maker can be automatically executed. Measurement speed in this mode was significantly increased. When the wavelengths are set to ALL, wavelengths are automatically changed.
• Repeated measurement
  A series of operations, such as measurement, wavelength switching, data saving, optical channel switching, and next optical fiber measurement, can be executed automatically under preset measurement conditions. This mode is ideal for measuring a multi-core optical fiber.
• Waveform comparison function
  Measured and saved data can be compared on the same screen. In addition, differences can be displayed as a waveform for simple observation of distance and level differences. This is useful for checking aging changes or comparing several fibers.
• Warning level setup function
  In automatic measurement mode, an event warning value can also be set in addition to a detection threshold value. For example, the threshold value can be set to the acceptance level, and warning value to a pass/rejection decision level. In this case, all events will be detected, and those exceeding the warning value are displayed in another color, therefore, enabling the operator to easily identify possible “borderline” events.
• Communication light check function
  When measuring a fiber in service, there is a possibility of mis-measurement by an OTDR. To guard against the risk of mis-measurement, this check function checks for the presence of light other than the OTDR optical measurement pulse.
• Visible LD
  A 635 nm visible LD option is available for the detection of breaks and loss points along the fiber to be measured.
• VGA output terminal
  The VGA connector outputs the screen interface to a CRT monitor, which is very useful for production-line applications.
• Large internal memory
  About 18 MB internal memory is provided as standard. The following table shows the number of waveforms which can be saved in each media.

Buying, Selling, Trading Anritsu MW9076D

If you’re selling your Anritsu MW9076D please fill out form on the right hand side of page.

If you’re looking to Sell Anritsu MW9070A SM MM Fiber OTDR MW0972B MW0973J

The MW9070A is a high-performance mini-OTDR for installation and maintenance of subscriber fiber optic lines and other fiber optic cables. It automatically detects the positions of faults in the cable and displays an event table listing faults and a trace waveform. The high-performance mini-OTDR has a large 7″ screen while staying within the size of a B5 file and weighing in at only 3.2 kg.

The MW9070A is designed with a dynamic range and short dead zone and is indispensable for detecting faults in optical trunk lines, subscriber lines, optical CATV cables, optical LANs, and other types of fiber optic cables. In addition, it is also invaluable in measuring transmission line losses, connection losses, return loss, and other parameters. Six optical units are available(OPTIONAL)depending on the wavelength and type of optical fiber, making the MW9070A an economic choice for a wide range of applications.

FEATURES AND BENEFITS :

* Compact (smaller than footprint) & lightweight (3.2 kg).
* Simple operation with automated fault measurement.
* Simultaneous waveform trace and event table display on large LCD.
* Built-in 3.5 inch FDD.

FEATURES AND BENEFITS : * Compact (smaller than footprint) & lightweight (3.2 kg). * Simple operation with automated fault measurement. * Simultaneous waveform trace and event table display on large LCD. * Built-in 3.5 inch FDD.

Buying, Selling, Trading Anritsu MW9070A

If you’re selling your Anritsu MW9070A please fill out form on the right hand side of page.