If you’re looking to Sell JDSU T-BERD 6000A 1Gig Optical Tester MSAM Module

Next Generation Carrier Ethernet Test Solution

T-BERD 6000A is a compact and lightweight test platform designed for all phases of network lifecycle from the installation to the maintenance of fiber networks. Modular in design, the T-BERD 6000A offers an extensive portfolio of test functionality for multiple network layers.

A single Multi-Services Application module provides an integrated solution for Ethernet, and higher-layer tests. Optical Modules allow thorough testing of short-haul, long-haul, FTTx, CWDM, and high speed 40Gbps networks.

Highlights

Compact, lightweight, rugged, and highly integrated platform
Multi-layer network solution from physical to services layer
Visual fault locator and lost test set functions are available on the base unit to improve the application module free space.
Next Generation Carrier Ethernet Test Solution
Backwards compatible with existing MTS-5000 optical modules.
Applications

10GigE LAN and 1 GigE optical interfaces.
Triple Play with IPTV testing.
Key Features

Lightweight platform: only 2.4kg/5.3 lbs.
Large 8.4 inch transreflective TFT color display improves viewing under any conditions.
Intuitive graphical user interface with touchscreen
Long battery life using smart Lithium ion cell.
Remotely controlled (Ethernet/IP)
Fast data transfer via USB, Ethernet port and 1GB extended memory.

JDSU Multi Services Application Module

The Multi-Services Application Module (MSAM) provides the industry’s most compact and modular multi-function, multi-layer DS1 tester for designing, installing, and maintaining Carrier-Grade networks. The MSAM enables a highly portable test set with the versatility needed to support Ethernet Layers 2-7, and Fibre Channel in one platform. With testing capabilities designed for Ethernet Backhaul, Metro Core telecom networks, cable provider switch centers, government telecommunication centers, and providers labs, the MSAM is the latest innovation for the award-winning, industry-leading T-BERD/ MTS family of test solutions.

Benefits

Maximizes ROI with modular, field-upgradeable tester that seamlessly expands into future technologies and interfaces
Guarantees end-customer satisfaction with deep application layer testing for data (TrueSpeed™ per RFC 6349), voice (VoIP), and video (IPTV)
Promotes efficient service and network management life cycle with integrated installation tools and advanced troubleshooting analysis in a single test instrument
Reduces installation and troubleshooting times with automated J-Complete test tools that follow best practices and provide repeatable methods and procedures with easy-to-understand results
Applications

Buying, Selling, Trading JDSU T-BERD 6000A

Tests and troubleshoots converged Ethernet/IP networks at 10 Mbps to 1 Gpbs interfaces and captures and analyzes packets
Tests Layer 1-3 Ethernet/IP SLAs with an auto¬mated, enhanced RFC 2544/SAMComplete per ITU-T Y.1564
Enables installation and maintenance of OTN networks up to 11.1 Gbps interface with ODU-0 support for Ethernet/IP client interfaces
Supports 8G FC dual-port interfaces (along with 1/2/4/1Gbps) for installation and maintenance of SANs and low-latency circuits
Key Features

Higher layer packet/frame analysis with Packet Capture, WireShark Decode, J-Mentor expert post capture analysis, and J-Profiler traffic explorer with top talkers
Layer 4 application testing with TCP WireSpeed (64 sessions, line rate to 10 Gbps) with the ability to provide multi-stream background traffic
Carrier Ethernet testing with Link and Service OAM (Y.1731), PBB/PBT, MPLS/VPLS, VLAN, Q-in-Q, and J-Proof Ethernet transparency
Layer 2 through Layer 4 comprehensive 10-stream multiplestream Ethernet testing enabling service activation and application performance modeling for quality of service verification
Enhanced RFC2544 tests includes frame delay variation, asymmetric rates and concurrent results to reduce overall testing time
OTN testing supported from OTU1 to OTU2e including SDH and ethernet clients
Fibre Channel support includes automated RFC-like scripting test, buffer-to-buffer control verification, and FC port and fabric login
Modular form-factor enables field expandability of test capabilities by adding modules and software test options
Simultaneous Ethernet, Fibre Channel.
Remote control via Web browser and VNC, VT-100 emulation, and Command Line SCPI

If you’re selling your JDSU T-BERD 6000A please fill out form on the right hand side of page.

If you’re looking to Sell JDSU T-BERD 8000 8126 HD Long Haul SM OTDR PM

JDSU T-BERD/MTS-8000

The MTS-8000 is a field-scalable optical test platform for both installation and maintenance. Based on the rich MTS-5000 heritage, the MTS8000 is the industry’s most innovative and cost-effective test solution for metro networks. A single Transport Module provides an integrated solution for Ethernet, SONET, SDH, PDH, and T-carrier networks. Optical Modules allow thorough testing of short-haul, long-haul, FTTx, CWDM, and DWDM networks.

Highlights

Practically unlimited field modularity means that you can match any requirement for test function, size, weight, or price.
Compact design starting at 3.4 kg (7.6 lb) exceeds Telcordia requirements for durability and transport.
Multiple test functions are available directly on the base unit to improve productivity and free application module space.
Backwards compatible with existing MTS-5000 optical modules.

Buying, Selling, Trading JDSU T-BERD 8000
Key Features

Configure with numerous application modules and a variety of storage media, including USB memory stick, and read/write CD-ROM.
All application modules are field-installable so that existing MTS-5000 users can simply field install the optical plug-in by adding an extender.
A Large color transreflective display is offered as standard for improved visibility for use in direct sunlight. A touchscreen option is available.
Extended battery life with up to 2 Lithium ion cells.

JDSU 8126 HD SingleMode Module
Central Wavelength 1310/1550nm +/- 20nm
Laser Safety Class Class 1
Pulse Width 10 ns To 20 µs
Distance Range Up to 380 km
RMS Dynamic Range 42db/40db
Event Dead Zone 3 m
Attenuation Dead Zone 15 m

If you’re selling your JDSU T-BERD 8000 please fill out form on the right hand side of page.

If you’re looking to Sell T-BERD 8000 8136 HD SM Long Haul OTDR

JDSU T-BERD/MTS-8000

The MTS-8000 is a field-scalable optical test platform for both installation and maintenance. Based on the rich MTS-5000 heritage, the MTS8000 is the industry’s most innovative and cost-effective test solution for metro networks. A single Transport Module provides an integrated solution for Ethernet, SONET, SDH, PDH, and T-carrier networks. Optical Modules allow thorough testing of short-haul, long-haul, FTTx, CWDM, and DWDM networks.

Highlights

Practically unlimited field modularity means that you can match any requirement for test function, size, weight, or price.
Compact design starting at 3.4 kg (7.6 lb) exceeds Telcordia requirements for durability and transport.
Multiple test functions are available directly on the base unit to improve productivity and free application module space.
Backwards compatible with existing MTS-5000 optical modules.
Key Features

Configure with numerous application modules and a variety of storage media, including USB memory stick, and read/write CD-ROM.
All application modules are field-installable so that existing MTS-5000 users can simply field install the optical plug-in by adding an extender.
A Large color transreflective display is offered as standard for improved visibility for use in direct sunlight. A touchscreen option is available.
Extended battery life with up to 2 Lithium ion cells.

JDSU 8136 HD Long Range OTDR Module
Central wavelength
1310/1550/1625 nm ±20 nm
±10 nm for 1625 nm
Laser safety class (21 CFR)
Class 1
Pulse Width
10 ns to 20 µs
Distance range Up to 380 km
RMS dynamic range 42 dB/40 dB/40 dB
Event dead zone 3 m
Attenuation dead zone 15 m
JDSU T-BERD/MTS-8000
The MTS-8000 is a field-scalable optical test platform for both installation and maintenance. Based on the rich MTS-5000 heritage, the MTS8000 is the industry’s most innovative and cost-effective test solution for metro networks. A single Transport Module provides an integrated solution for Ethernet, SONET, SDH, PDH, and T-carrier networks. Optical Modules allow thorough testing of short-haul, long-haul, FTTx, CWDM, and DWDM networks.

Buying, Selling, Trading T-BERD 8000
Highlights

Practically unlimited field modularity means that you can match any requirement for test function, size, weight, or price.
Compact design starting at 3.4 kg (7.6 lb) exceeds Telcordia requirements for durability and transport.
Multiple test functions are available directly on the base unit to improve productivity and free application module space.
Backwards compatible with existing MTS-5000 optical modules.
Key Features

Configure with numerous application modules and a variety of storage media, including USB memory stick, and read/write CD-ROM.
All application modules are field-installable so that existing MTS-5000 users can simply field install the optical plug-in by adding an extender.
A Large color transreflective display is offered as standard for improved visibility for use in direct sunlight. A touchscreen option is available.
Extended battery life with up to 2 Lithium ion cells.

JDSU 8136 HD Long Range OTDR Module
Central wavelength
1310/1550/1625 nm ±20 nm
±10 nm for 1625 nm
Laser safety class (21 CFR)
Class 1
Pulse Width
10 ns to 20 µs
Distance range Up to 380 km
RMS dynamic range 42 dB/40 dB/40 dB
Event dead zone 3 m
Attenuation dead zone 15 m

If you’re selling your T-BERD 8000 please fill out form on the right hand side of page.

If you’re looking to Sell JDSU T-BERD 8000 8126 VSRe SM OTDR 8136 OFI 2

JDSU T-BERD/MTS-8000

The MTS-8000 is a field-scalable optical test platform for both installation and maintenance. Based on the rich MTS-5000 heritage, the MTS8000 is the industry’s most innovative and cost-effective test solution for metro networks. A single Transport Module provides an integrated solution for Ethernet, SONET, SDH, PDH, and T-carrier networks. Optical Modules allow thorough testing of short-haul, long-haul, FTTx, CWDM, and DWDM networks.

Highlights

Practically unlimited field modularity means that you can match any requirement for test function, size, weight, or price.
Compact design starting at 3.4 kg (7.6 lb) exceeds Telcordia requirements for durability and transport.
Multiple test functions are available directly on the base unit to improve productivity and free application module space.
Backwards compatible with existing MTS-5000 optical modules.
Key Features

Configure with numerous application modules and a variety of storage media, including USB memory stick, and read/write CD-ROM.
All application modules are field-installable so that existing MTS-5000 users can simply field install the optical plug-in by adding an extender.
A Large color transreflective display is offered as standard for improved visibility for use in direct sunlight. A touchscreen option is available.
Extended battery life with up to 2 Lithium ion cells.

JDSU 8126 VSRe Singlemode OTDR Module

The new JDSU Very Short Range (VSRe) OTDR Module for the MTS/T-Berd 8000 and MTS/T-berd 6000 product platforms provides the needed performance with maximum efficiency for any access/FTTx/Metro network test application.

In the telecommunication market of today, OTDR est solutions must be cost-effective, easy-to-operate and flexible for optimum use in all testing conditions. The VSRe OTDR module meets these challenges for both present and future needs.

The MTS/T-Berd product line has built a solid worldwide reputation based on cutting-edge design and performance. Compatibility with thousands of field-proven units deployed worldwide by every major telecommunications network operator enables easy migration to new network technologies while continuing to reduce expenses.

Fast and precise fault location
Fast detection
Precise fault location
One button automation
No specific setting required
Distance, loss, and ORL measurements
Ideal for construction and maintenance
Fully automatic or manual modes
Templates for multi fiber acquisitions
Automatic, semi-automatic, or manual measurments
Multitrace display for trace comparison
Auto filenaming and auto storage with comprehensive cable and fiber identification
Macrobend detection
Specifications

Typical specifications at 25°C
Optical interfaces
Applicable fiber SMF 9/125 µm
Interchangeable optical connectors FC, SC, DIN, ST, LC
Physical
Weight 600g (1.1lbs)
Size 213 x 124 x 32 mm
(8.38 x 4.88 x 1.26 in)
OTDR Optical performance
Central wavelength 1310/1550 nm
±20 nm
Laser safety class (21 CFR) Class 1M
Pulsewidth 10 ns to 10µs ns
Distance range Up to 200 km
RMS Dynamic Range 32dB / 30dB
Event dead zone 2m
Attenuation dead zone 8m
Technical characteristics
Distance units Kilometers, feet, and miles
Group index range 1.30000 to 1.70000 in
0.00001 steps
Number of data points Up to 128,000 data points
Distance measurement Automatic or dual cursor
Display span 2.6 m to 200 km
Cursor resolution 1 cm
Sampling resolution 4 cm
Accuracy ±1 m ±sampling resolution ±1.10-5 x distance
(Excluding group index uncertainties)
Attenuation measurement
Automatic, manual, 2-point, 5-point, and LSA
Display span 1.25 dB to 55 dB
Display resolution 0.001 dB
Cursor resolution 0.001 dB
Linearity ±0.03 dB/dB
Threshold 0.01 to 5.99 dB in 0.01 dB steps
Reflectance/ORL measurements
Automatic or manual
Uncertainty +/-2dB
Display resolution 0.01 dB
Threshold -11 dB to -99 dB in 1 dB steps
Storage

Bellcore/Telcordia compatible
Version1.1 and Version 2.0

JDSU 8136OFI2 SM OFI Module

Versatile optical test module
Test solutions need to be cost effective, increase productivity, and reduce the number and complexity of test instruments carried in the field. JDSU’s OFI module for the MTS/T-BERD platforms was developed in response to these issues. Configurable at the time of order, this module uses intuitive test functions and simple PASS/FAIL displays to enhance productivity and reduce the burden of training. Technicians can easily process cables with high fiber counts as well as quickly generate professional proof-of-performance reports using JDSU’s report generation software.

Buying, Selling, Trading JDSU T-BERD 8000

Multitest platforms
The MTS/T-BERD platforms’ scalable design let field technicians quickly and easily plug in the multifunction loss test module and perform precise measurements in the outside plant all the way to the central office. The MTS/T-BERD platforms also include a full range of OTDR, PMD, chromatic dispersion, spectral attenuation, and DWDM test modules.

Best in class for FTTx testing and high fiber-count cables
The OFI module’s automated test functions combined with an intuitive user interface help fiber installers and technicians save time and reduce costs while operating in the field.

Automated bi-directional loss test set for continuity check, fiber loss, return loss and length
Testing at telecom wavelengths 1310, 1550, and 1625 nm
Testing at FTTx/PONs wavelengths 1310, 1490, and 1550 nm
Accurate ORL measurements on a very short span such as FTTx
Housed in the MTS/T-BERD optical test mainframe, the OFI module is easily set up for referencing insertion loss and ORL measurements using an on-screen step-by-step guide. The OFI module has an integrated precise standalone power meter to enhance referencing and improve insertion loss measurement accuracy. In addition, the instrument can be operated in continuous light source mode for fiber identification or unidirectional loss measurement.

Compatible with the standalone OFI-2000
The OFI multifunction loss test module can be used at one end and a JDSU OFI-2000 Multifunction Loss Test Set at the other end to perform continuity check, bi-directional loss, return loss and length measurements. Communication between both products can then be enabled through the optical talk set or via the Short Message System.

Specifications:
General technical specifications (typical at 25° C)
Weight
0.6 kg (1.1 lbs)
Dimensions (w x h x d) 213 x 124 x 32 mm
(8.38 x 4.88 x 1.26 in)
Optical interfaces
Applicable fiber SMF 9/125 µm
Interchangeable optical connectors FC, SC, DIN, etc…
Source function (also valid for source mode)
Laser type Class 1 laser
Wavelength at 25° C
1310+/-30 nm, 1490+/-10 nm, 1550+/-30 nm, 1625+/-10 nm
Spectral bandwidth
5 nm maximum
Output level into 9/125 µm fiber (CW mode) – 3.5 dBm
Modulated output average level 3 dB less
Level stability
Short term 15 min (T = +/-0.3 K) +/- 0.02 dB
Long term 8 hours (T = +/-0.3 K) +/- 0.2 dB
Modulation frequencies Continuous wave, 270 Hz, 330 Hz,
1 kHz, 2 kHz
TWINtest and auto-l All wavelength activated one after the other
Loss test set function
Dynamic range 60 dB
Accuracy Loop back +/-0.25 dB /side-by-side +/-0.15 dB
Result resolution 0.01 dB
Optical return Loss (also valid for manual ORL)
ORL measurement display range Up to 65 dB
Accuracy +/-0.5dB
Length function
Distance Accuracy
L<3 km: +/-50 m, 3 km
Standalone power meter
Wavelength range (adjustable per 1 nm) 800-1650 nm
Selectable wavelength
850/1300/1310/1490/1510/1550/1625 nm
Auto-l detection (incl.TWINtest) 850/1310/1490/1550/1625 nm
Modulation detection 270 Hz, 330 Hz, 1 kHz, 2 kHz
Display resolution 0.01 dB
Power level
Standard
High Power
Dynamic range
+10 to –60 dBm
+26 to –55 dBm
Accuracy
(1310nm, -20dBm)
+/-0.2 dB
+/- 0.25 dB
Detector type
Ge
filtered InGaAs, 2 mm

If you’re selling your JDSU T-BERD 8000 please fill out form on the right hand side of page.

If you’re looking to Sell JDSU T-BERD 2000 4146 SM MM Quad OTDR Module

JDSU T-BERD 2000 Modular Test Set
Costs, workflow, quality, network performance, and customer experience are critical for the success of today’s fiber optic networks. Selecting the right test tools has become key toward meeting these needs.

The JDSU T-BERD 2000 is a handheld multi-test platform that provides field technicians with a single handheld unit to install, turn-up and maintain these networks to the highest standards.

Its innovative design ensures that all essential fiber test tools are close at hand, whatever the job or location. A large color screen with graphical user interface drives simple operation and optimal workflow in the field.

Test capabilities include a range of OTDR modules for multimode and single-mode testing, as well as a range of FiberCompleteTM modules for automated Insertion Loss/Optical Return Loss (IL/ORL), and fault finding. Both OTDR and FiberComplete modules are passive optical network (PON) optimized. The unit is also ready for conector end face pass/fail analysis to IEC standards with a digital analysis microscope.

Widest Range of Applications for Maximum Flexibility
The T-BERD 2000 provides the largest range of test capabilities offered in one handheld unit. The modular design allows service providers the maximum flexibility to scale their investment and evolve with the growth of their network.
The instrument supports the whole range of essential fiber analysis tools including connection inspection, connection check, source, ORL, OTDR, a power meter, a PON selective power meter, and CWDM optical spectrum analyzer.

Application modules used with the T-BERD 2000 can also be used with the T-BERD 4000 and the two products are interoperable.

Boosted Productivity with Seamless Data Workflow
The T-BERD 2000 integrates various communication capabilities allowing remote control, data and setup uploads/downloads, and report transfer. The unit has one high-speed 1G Ethernet port and three USB ports.

Features:
Large 5-inch touch-screen display
Field-installable modules
Wide range of OTDR modules including Quad and PON
FiberComplete automated IL/ORL, PON power meter, and CWDM analyzer
Automated fiber inspection and IEC pass/fail analysis
New-generation lithium polymer (LiPo) battery for 8-hour operation
Cross-compatible with T-BERD 4000

Buying, Selling, Trading JDSU T-BERD 2000

Specifications:
General (typical at 25°C)
Display
5-inch TFT color touch screen (12.5 cm)
Resolution 800 x 480 WVGA
Interfaces
Two USB 2.0 ports
One mini-USB 2.0 port
RJ-45 LAN 10/100/1000 Mbps
Internal memory
1 GB (128 MB for storage)
Battery Rechargeable lithium-polymer battery
8-hour operation as per Telcordia GR-196-CORE
Power supply AC/DC adapter, input 100-250 VAC,
50-60 Hz; 2.5A max, output 12 VDC, 25W
Electrical safety: EN60950-compliant
Size with module (H x W x D)
175 x 138 x 80mm
(6.9 x 5.4 x 3.2 in)
Weight
with battery
with battery and LM OTDR

0.864 kg (1.89 lbs)
1.21 kg (2.67 lbs)
Temperature Operating: -20 to +50°C (-4 to 122°F)
Storage: -20 to +60°C (-4 to 140°F)
Relative humidity 0% to 95% non-condensing
Built-In Power Meter Specifications
Calibrated wavelengths
850/1310/1490/1550/ 1625/1650
Wavelength range 800 to 1650 nm in 1 nm steps
Accuracy ±0.2 dB
Measurement range +5 to -50 dBm
Maximum resolution 0.01 dB/0.01nW
Connector type Universal push pull (UPP)

4146 Quad OTDR Module
Singlemode
1310/1550nm
RMS Dynamic Range
37/35 dB
Dead Zones
0.9/4 m
Multimode
850/1300nm
RMS Dynamic Range
27/25 dB
Dead Zones
0.8/4 m

If you’re selling your JDSU T-BERD 2000 please fill out form on the right hand side of page.

If you’re looking to Sell Acterna MTS 8000 11.1G Transport Module

T-BERD/MTS 8000 (TB/MTS 8000) Transport module

As service providers expand their offerings into new data and wavelength services, test requirements are also expanding beyond traditional SONET and T-Carrier technologies into Data and Optical layer technologies. Service providers are now responsible for installing and maintaining new network elements and service types that were not present in legacy networks.

The T-BERD/MTS 8000 (TB/MTS 8000) Transport module addresses these trends by providing the necessary test functionality to support all of these services in one integrated module. Weighing less than 15 pounds and operating on battery power for up to two hours at 10 Gb/s line rates, the TB/MTS 8000 is conveniently sized and designed for field test applications.

The TB/MTS 8000 Transport module’s Ethernet configuration allows for Ethernet and IP test capabilities from all Ethernet interfaces – 10/100/1000 copper, optical Gigabit Ethernet (GigE), and 10GigE LAN-Phy and WAN-Phy. Key test applications of the TB/MTS 8000 include connectivity, throughput, and quality of service (QoS) testing for emerging IP networks. The TB/MTS 8000 also provides RFC 2544 testing for verification of Ethernet and IP conformance to service level agreements (SLAs).

The TB/MTS 8000 features a full dual-port capability for 10/100/1000 copper and optical GigE interfaces – with two transmitters (TX) and two receivers (RX) – allowing for the simultaneous testing of two Ethernet/VLAN or IP circuits. These circuits may be provisioned for two fully independent customers, or they may represent two routes in a single network.

The dual-port capability of the TB/MTS 8000 Transport module enables field technicians to perform three important types of testing during turn-up and first-line of maintenance:
– Simultaneous Circuit Testing: Testing of two independent circuits concurrently
– Network Element Wrap Testing: Testing an element from the client to the network side
– In-Service Troubleshooting: Monitoring from two different directions on the circuit

Dual-Port Test Applications
Simultaneous Circuit Testing
Each of the TB/MTS 8000 Transport module’s two Ethernet ports has its own transmitter and receiver, both of which are able to connect to the customer’s switc  or router. This enables field technicians to test separate Ethernet/VLAN or IP connections through the network.

In a multi-site network, technicians can use the TB/MTS 8000 to test two routes independently of one another. If the service is straightforward Ethernet transport, meaning no switching occurs, the traffic can be returned to the origination point by a simple hard loop at the far-end destination point. If the traffic is switched at the MAC (layer 2) or IP (layer 3) layers, then another TB/MTS 8000 test instrument is required to perform the loop at the far end. In the loopback testing scenario, the TB/MTS 8000 takes the source and destination MAC or IP addresses of the transmitting Ethernet frame or IP packet and swaps them, thereby ensuring that the originating traffic travels properly through the network back to its origination point. In addition to testing the connectivity of each route, the TB/MTS 8000 enables technicians to test the performance of specific class of service (CoS) applications, using VLAN-based or TOS/DSCP-based traffic prioritization schemes.

Buying, Selling, Trading Acterna MTS 8000

Testing Parallel Virtual Connections Simultaneously
The TB/MTS 8000 Transport module also enables technicians to test two routes between the same origination point and the same termination point. If a customer is experiencing different delays on two parallel routes, the TB/MTS 8000 can be used to establish two VLAN or IP connections, with different tags and user priorities on each port, to a remote site. This test setup allows for verification of the round trip delay (RTD) on each path independently to determine if the delay is the same on both routes, and to verify/compare the delay on the two different routes.

Testing Two Independent Routes Simultaneously
When installing service to two separate customers, service providers only need one dual-port TB/MTS 8000 Transport module to perform installation testing. The TB/MTS 8000 emulates the customer’s switch/router, sends IEEE-complaint Ethernet traffic, and performs RFC 2544 tests for both end customers. This allows the service provider to consistently and repeatedly test the Ethernet traffic at every route and to save time by turning-up two customer circuits simultaneously

Network Element Wrap Testing
The TB/MTS 8000 Transport module also supports network element wrap testing. This enables technicians to pre-qualify a switch or router before bringing it into service. Full Gigabit Ethernet (1 GigE) throughput testing can be accomplished by connecting a single TB/MTS 8000 to two separate ports on both sides of the network element – client side and network side.

In addition, sub-rate line cards can be verified at different rates other than the network rate. For example, technicians can connect one TB/MTS 8000 port to the 10/100 Mb/s client card and the other TB/MTS 8000 port to the 1 GigE (1000 Mb/s) network card and perform throughput testing through the network element. This ensures that the network element backplane can sufficiently buffer and pass incoming traffic, without dropping any frames/packets. The TB/MTS 8000 can perform RFC 2544 testing to verify the configuration of the network element and the throughput of its line cards, as well as ensure consistent backplane functionality in both directions.

With this developing market trend, the TB/MTS 8000 Transport module is well-suited to enable technicians to use one test set to turn up services ranging from 10/100/1000 copper Ethernet, optical GigE, and optical 10 GigE – all from a single module. In addition, with its dual-port configuration, the TB/MTS 8000  provides a comprehensive and robust turn-up tool, thereby minimizing follow-on installation and maintenance issues.

If you’re selling your Acterna MTS 8000 please fill out form on the right hand side of page.

If you’re looking to Sell Wavetek Acterna MTS-5100e SM Fiber OTDR

Advanced modular tester for high precision FTTx testing
The unique JDSU MTS-5100e is a fiber tester with a range of plug-in modules providing a comprehensive, integrated solution for OTDR and power meters with talk set option testing in one field-rugged instrument. Powerful, easy to use and highly cost-effective, MTS-5100e is designed to push the boundaries of field test productivity for network installers, operators and maintenance teams.

A wide range of field-interchangeable modules are available for the MTS-5100eo platform, including OTDRs for multimode (MM), very short haul/FTTx (VSR), short range (SRe), medium haul (DR), long haul (HD), very long haul (VHD), and 1625 nm, visual fault locator, and a range of light sources and power meters with talk set option.

JDSU’s optical time domain reflectometer (OTDR) and loss test (LTS) plug-in modules are compact, yet powerful additions to the MTS-5100e family of testers.

The JDSU MTS-5100eo offers the industry’s fastest, highest performance solutions of any OTDR field instrument on the market. Both the OTDR and LTS modules deliver high accuracy, cost effective, reliable testing for the installation and maintenance of FTTx networks.

Highlights

Wide range of OTDR and OLTS modules covering every application with two fast field interchangeable slots for modules
The ONLY platform highly visible in bright sunlight, this NEW high visibility screen option means the MTS-5100eo can be used in any lighting condition
From LAN (1.5 m event dead zone) to very long haul applications (44 dB dynamic range)
High performance testing (up to 128,000 acquisition points with 0.1 s real-time sweep)
Maximum portability (3.5 kg) and up to 16 hours battery operation (Telcordia GR196)
A complete range of PC software to enhance your OTDR reporting capabilities reducing cable acceptance reporting by up to 70%

Buying, Selling, Trading Wavetek Acterna MTS-5100e

The JDSU MTS-5100eo is the fastest, most reliable and accurate OTDR on the market

Together, the module’s automation and rapid testing features offer impressive time savings for companies involved in commissioning and locating faults in FTTx networks.

Maximizing field productivity
The most important prerequisites for testing in the field are ease-of-use and speed of acquisition. The OTDR module ensures maximum test productivity by providing one-button, automated operation for all of its critical test routines and a very high data acquisition speed of 40 dB in seconds.

Delivering the industry’s highest performance OTDR
The MTS-5100eo module is the fastest and most accurate OTDR to-date. It offers a dynamic range of up to 44 dB at 1550 nm and boasts a 0.1 second sweep time. As part of the MTS-5100eo, the OTDR module has a test capability of more than 200 km and can measure up to 128,000 separate data points with 4 cm sampling resolution. The product’s short deadzone enables the user to differentiate events down to 1 meter.

Optimized functions for in-depth analysis/operation
The OTDR’s bidirectional analysis capability enables true splice loss measurement with both end traces. Its multiple trace management feature greatly assists the process of proactively managing fiber problems and helps compare different current and stored measurements for in-depth analysis. A powerful macro function enables users to perform a series of tests without ongoing user intervention.

Suitable for every skill level
Whatever the user’s skill level, the OTDR module and MTS-5100eo instrument combination can rise to the challenge. Direct access keys ensure that users can access all the instrument’s sophisticated features via a highly intuitive interface and by a comprehensive set up and results screen. The OTDR module delivers complete trace analysis, with a direct link between trace and table.

Enhanced reporting power
Powerful instruments require powerful reporting tools. The OTDR and loss test set come with the most complete analysis and reporting software.

The package supports direct Ethernet transfer to a PC running JDSU’s OFS-100 Optical Fiber Trace Software or OFS-200 Optical Fiber Cable Software. This enables users to perform automatic multiple trace analysis and print out cable test results in batches, for fast generation of dedicated acceptance reports.

Technical specifications

Display
Passive color, 7.8 inches, LCD 640 × 480
Active TFT color, 8.4 inches, LCD 640 × 480,
Languages
English, French, German, Spanish, Portuguese, Italian, Chinese, Taiwanese, Russian, Korean, Japanese, Turkish
Weight
MTS-5100eo 3.5 kg (7.7 lb) including 1 module and 1 battery
Size
MTS-5100eo 300 × 235 × 90 mm
11.8 × 9.25 × 3.5 in
Input/Output
MTS-5100eo RS-232-C, Centronics interface, external keyboard (optional), Ethernet interface (optional)
Power supply AC or internal removable NiMH batteries
Operation time up to 16 hours with 2 batteries (Bellcore GR-196)
Internal charger Yes (external charger available)
Charging time < 3 hours per battery
DC input 11 to 14 V
AC adapter
MTS-5100eo Input 100-250 V, 50-60 Hz, 1.6 A, Output 12 V DC / 4.2 A
Results display dBm, dBr, nW, ìW, mW
Temperature range
Operating AC Power
(no options) –20 °C to 50 °C (–4 °F to +122 °F)
Operating with
all options 0 °C to 40 °C (+32 °F to +104 °F)
Storage –20 °C to 60 °C (–4 °F to +140 °F)
Humidity 95% without condensing
EMI/ESD CE compliant

5026 DR Medium Range / High Resolution Single mode 1310/1550 nm Module

Central wavelength 1310/1550 nm
± 20 nm
Laser safety class (21 CFR) Class 1
Pulse width 5 ns to 10 ìs
Distance range Up to 260 km
RMS dynamic range 37 dB/35 dB
Event dead zone 1 m
Attenuation dead zone 8 m

If you’re selling your Wavetek Acterna MTS-5100e please fill out form on the right hand side of page.

If you’re looking to Sell Acterna MTS 8000 10G Transport Module

T-BERD/MTS 8000 (TB/MTS 8000) Transport module

As service providers expand their offerings into new data and wavelength services, test requirements are also expanding beyond traditional SONET and T-Carrier technologies into Data and Optical layer technologies. Service providers are now responsible for installing and maintaining new network elements and service types that were not present in legacy networks.

The T-BERD/MTS 8000 (TB/MTS 8000) Transport module addresses these trends by providing the necessary test functionality to support all of these services in one integrated module. Weighing less than 15 pounds and operating on battery power for up to two hours at 10 Gb/s line rates, the TB/MTS 8000 is conveniently sized and designed for field test applications.

The TB/MTS 8000 Transport module’s Ethernet configuration allows for Ethernet and IP test capabilities from all Ethernet interfaces – 10/100/1000 copper, optical Gigabit Ethernet (GigE), and 10GigE LAN-Phy and WAN-Phy. Key test applications of the TB/MTS 8000 include connectivity, throughput, and quality of service (QoS) testing for emerging IP networks. The TB/MTS 8000 also provides RFC 2544 testing for verification of Ethernet and IP conformance to service level agreements (SLAs).

The TB/MTS 8000 features a full dual-port capability for 10/100/1000 copper and optical GigE interfaces – with two transmitters (TX) and two receivers (RX) – allowing for the simultaneous testing of two Ethernet/VLAN or IP circuits. These circuits may be provisioned for two fully independent customers, or they may represent two routes in a single network.

The dual-port capability of the TB/MTS 8000 Transport module enables field technicians to perform three important types of testing during turn-up and first-line of maintenance:
– Simultaneous Circuit Testing: Testing of two independent circuits concurrently
– Network Element Wrap Testing: Testing an element from the client to the network side
– In-Service Troubleshooting: Monitoring from two different directions on the circuit

Dual-Port Test Applications
Simultaneous Circuit Testing
Each of the TB/MTS 8000 Transport module’s two Ethernet ports has its own transmitter and receiver, both of which are able to connect to the customer’s switc  or router. This enables field technicians to test separate Ethernet/VLAN or IP connections through the network.

In a multi-site network, technicians can use the TB/MTS 8000 to test two routes independently of one another. If the service is straightforward Ethernet transport, meaning no switching occurs, the traffic can be returned to the origination point by a simple hard loop at the far-end destination point. If the traffic is switched at the MAC (layer 2) or IP (layer 3) layers, then another TB/MTS 8000 test instrument is required to perform the loop at the far end. In the loopback testing scenario, the TB/MTS 8000 takes the source and destination MAC or IP addresses of the transmitting Ethernet frame or IP packet and swaps them, thereby ensuring that the originating traffic travels properly through the network back to its origination point. In addition to testing the connectivity of each route, the TB/MTS 8000 enables technicians to test the performance of specific class of service (CoS) applications, using VLAN-based or TOS/DSCP-based traffic prioritization schemes.

Buying, Selling, Trading Acterna MTS 8000
Testing Parallel Virtual Connections Simultaneously
The TB/MTS 8000 Transport module also enables technicians to test two routes between the same origination point and the same termination point. If a customer is experiencing different delays on two parallel routes, the TB/MTS 8000 can be used to establish two VLAN or IP connections, with different tags and user priorities on each port, to a remote site. This test setup allows for verification of the round trip delay (RTD) on each path independently to determine if the delay is the same on both routes, and to verify/compare the delay on the two different routes.

Testing Two Independent Routes Simultaneously
When installing service to two separate customers, service providers only need one dual-port TB/MTS 8000 Transport module to perform installation testing. The TB/MTS 8000 emulates the customer’s switch/router, sends IEEE-complaint Ethernet traffic, and performs RFC 2544 tests for both end customers. This allows the service provider to consistently and repeatedly test the Ethernet traffic at every route and to save time by turning-up two customer circuits simultaneously

Network Element Wrap Testing
The TB/MTS 8000 Transport module also supports network element wrap testing. This enables technicians to pre-qualify a switch or router before bringing it into service. Full Gigabit Ethernet (1 GigE) throughput testing can be accomplished by connecting a single TB/MTS 8000 to two separate ports on both sides of the network element – client side and network side.

In addition, sub-rate line cards can be verified at different rates other than the network rate. For example, technicians can connect one TB/MTS 8000 port to the 10/100 Mb/s client card and the other TB/MTS 8000 port to the 1 GigE (1000 Mb/s) network card and perform throughput testing through the network element. This ensures that the network element backplane can sufficiently buffer and pass incoming traffic, without dropping any frames/packets. The TB/MTS 8000 can perform RFC 2544 testing to verify the configuration of the network element and the throughput of its line cards, as well as ensure consistent backplane functionality in both directions.

With this developing market trend, the TB/MTS 8000 Transport module is well-suited to enable technicians to use one test set to turn up services ranging from 10/100/1000 copper Ethernet, optical GigE, and optical 10 GigE – all from a single module. In addition, with its dual-port configuration, the TB/MTS 8000  provides a comprehensive and robust turn-up tool, thereby minimizing follow-on installation and maintenance issues.

If you’re selling your Acterna MTS 8000 please fill out form on the right hand side of page.

If you’re looking to Sell Acterna MTS 8000 T-BERD Transport Module

T-BERD/MTS 8000 (TB/MTS 8000) Transport module

As service providers expand their offerings into new data and wavelength services, test requirements are also expanding beyond traditional SONET and T-Carrier technologies into Data and Optical layer technologies. Service providers are now responsible for installing and maintaining new network elements and service types that were not present in legacy networks.

The T-BERD/MTS 8000 (TB/MTS 8000) Transport module addresses these trends by providing the necessary test functionality to support all of these services in one integrated module. Weighing less than 15 pounds and operating on battery power for up to two hours at 10 Gb/s line rates, the TB/MTS 8000 is conveniently sized and designed for field test applications.

The TB/MTS 8000 Transport module’s Ethernet configuration allows for Ethernet and IP test capabilities from all Ethernet interfaces – 10/100/1000 copper, optical Gigabit Ethernet (GigE), and 10GigE LAN-Phy and WAN-Phy. Key test applications of the TB/MTS 8000 include connectivity, throughput, and quality of service (QoS) testing for emerging IP networks. The TB/MTS 8000 also provides RFC 2544 testing for verification of Ethernet and IP conformance to service level agreements (SLAs).

The TB/MTS 8000 features a full dual-port capability for 10/100/1000 copper and optical GigE interfaces – with two transmitters (TX) and two receivers (RX) – allowing for the simultaneous testing of two Ethernet/VLAN or IP circuits. These circuits may be provisioned for two fully independent customers, or they may represent two routes in a single network.

The dual-port capability of the TB/MTS 8000 Transport module enables field technicians to perform three important types of testing during turn-up and first-line of maintenance:
– Simultaneous Circuit Testing: Testing of two independent circuits concurrently
– Network Element Wrap Testing: Testing an element from the client to the network side
– In-Service Troubleshooting: Monitoring from two different directions on the circuit

Dual-Port Test Applications
Simultaneous Circuit Testing
Each of the TB/MTS 8000 Transport module’s two Ethernet ports has its own transmitter and receiver, both of which are able to connect to the customer’s switc  or router. This enables field technicians to test separate Ethernet/VLAN or IP connections through the network.

In a multi-site network, technicians can use the TB/MTS 8000 to test two routes independently of one another. If the service is straightforward Ethernet transport, meaning no switching occurs, the traffic can be returned to the origination point by a simple hard loop at the far-end destination point. If the traffic is switched at the MAC (layer 2) or IP (layer 3) layers, then another TB/MTS 8000 test instrument is required to perform the loop at the far end. In the loopback testing scenario, the TB/MTS 8000 takes the source and destination MAC or IP addresses of the transmitting Ethernet frame or IP packet and swaps them, thereby ensuring that the originating traffic travels properly through the network back to its origination point. In addition to testing the connectivity of each route, the TB/MTS 8000 enables technicians to test the performance of specific class of service (CoS) applications, using VLAN-based or TOS/DSCP-based traffic prioritization schemes.

Buying, Selling, Trading Acterna MTS 8000

Testing Parallel Virtual Connections Simultaneously
The TB/MTS 8000 Transport module also enables technicians to test two routes between the same origination point and the same termination point. If a customer is experiencing different delays on two parallel routes, the TB/MTS 8000 can be used to establish two VLAN or IP connections, with different tags and user priorities on each port, to a remote site. This test setup allows for verification of the round trip delay (RTD) on each path independently to determine if the delay is the same on both routes, and to verify/compare the delay on the two different routes.

Testing Two Independent Routes Simultaneously
When installing service to two separate customers, service providers only need one dual-port TB/MTS 8000 Transport module to perform installation testing. The TB/MTS 8000 emulates the customer’s switch/router, sends IEEE-complaint Ethernet traffic, and performs RFC 2544 tests for both end customers. This allows the service provider to consistently and repeatedly test the Ethernet traffic at every route and to save time by turning-up two customer circuits simultaneously

Network Element Wrap Testing
The TB/MTS 8000 Transport module also supports network element wrap testing. This enables technicians to pre-qualify a switch or router before bringing it into service. Full Gigabit Ethernet (1 GigE) throughput testing can be accomplished by connecting a single TB/MTS 8000 to two separate ports on both sides of the network element – client side and network side.

In addition, sub-rate line cards can be verified at different rates other than the network rate. For example, technicians can connect one TB/MTS 8000 port to the 10/100 Mb/s client card and the other TB/MTS 8000 port to the 1 GigE (1000 Mb/s) network card and perform throughput testing through the network element. This ensures that the network element backplane can sufficiently buffer and pass incoming traffic, without dropping any frames/packets. The TB/MTS 8000 can perform RFC 2544 testing to verify the configuration of the network element and the throughput of its line cards, as well as ensure consistent backplane functionality in both directions.

With this developing market trend, the TB/MTS 8000 Transport module is well-suited to enable technicians to use one test set to turn up services ranging from 10/100/1000 copper Ethernet, optical GigE, and optical 10 GigE – all from a single module. In addition, with its dual-port configuration, the TB/MTS 8000  provides a comprehensive and robust turn-up tool, thereby minimizing follow-on installation and maintenance issues.

If you’re selling your Acterna MTS 8000 please fill out form on the right hand side of page.

If you’re looking to Sell Acterna MTS 8000 10G Transport Module

T-BERD/MTS 8000 (TB/MTS 8000) Transport module

As service providers expand their offerings into new data and wavelength services, test requirements are also expanding beyond traditional SONET and T-Carrier technologies into Data and Optical layer technologies. Service providers are now responsible for installing and maintaining new network elements and service types that were not present in legacy networks.

The T-BERD/MTS 8000 (TB/MTS 8000) Transport module addresses these trends by providing the necessary test functionality to support all of these services in one integrated module. Weighing less than 15 pounds and operating on battery power for up to two hours at 10 Gb/s line rates, the TB/MTS 8000 is conveniently sized and designed for field test applications.

The TB/MTS 8000 Transport module’s Ethernet configuration allows for Ethernet and IP test capabilities from all Ethernet interfaces – 10/100/1000 copper, optical Gigabit Ethernet (GigE), and 10GigE LAN-Phy and WAN-Phy. Key test applications of the TB/MTS 8000 include connectivity, throughput, and quality of service (QoS) testing for emerging IP networks. The TB/MTS 8000 also provides RFC 2544 testing for verification of Ethernet and IP conformance to service level agreements (SLAs).

The TB/MTS 8000 features a full dual-port capability for 10/100/1000 copper and optical GigE interfaces – with two transmitters (TX) and two receivers (RX) – allowing for the simultaneous testing of two Ethernet/VLAN or IP circuits. These circuits may be provisioned for two fully independent customers, or they may represent two routes in a single network.

The dual-port capability of the TB/MTS 8000 Transport module enables field technicians to perform three important types of testing during turn-up and first-line of maintenance:
– Simultaneous Circuit Testing: Testing of two independent circuits concurrently
– Network Element Wrap Testing: Testing an element from the client to the network side
– In-Service Troubleshooting: Monitoring from two different directions on the circuit

Dual-Port Test Applications
Simultaneous Circuit Testing
Each of the TB/MTS 8000 Transport module’s two Ethernet ports has its own transmitter and receiver, both of which are able to connect to the customer’s switc  or router. This enables field technicians to test separate Ethernet/VLAN or IP connections through the network.

In a multi-site network, technicians can use the TB/MTS 8000 to test two routes independently of one another. If the service is straightforward Ethernet transport, meaning no switching occurs, the traffic can be returned to the origination point by a simple hard loop at the far-end destination point. If the traffic is switched at the MAC (layer 2) or IP (layer 3) layers, then another TB/MTS 8000 test instrument is required to perform the loop at the far end. In the loopback testing scenario, the TB/MTS 8000 takes the source and destination MAC or IP addresses of the transmitting Ethernet frame or IP packet and swaps them, thereby ensuring that the originating traffic travels properly through the network back to its origination point. In addition to testing the connectivity of each route, the TB/MTS 8000 enables technicians to test the performance of specific class of service (CoS) applications, using VLAN-based or TOS/DSCP-based traffic prioritization schemes.

Testing Parallel Virtual Connections Simultaneously
The TB/MTS 8000 Transport module also enables technicians to test two routes between the same origination point and the same termination point. If a customer is experiencing different delays on two parallel routes, the TB/MTS 8000 can be used to establish two VLAN or IP connections, with different tags and user priorities on each port, to a remote site. This test setup allows for verification of the round trip delay (RTD) on each path independently to determine if the delay is the same on both routes, and to verify/compare the delay on the two different routes.

Testing Two Independent Routes Simultaneously
When installing service to two separate customers, service providers only need one dual-port TB/MTS 8000 Transport module to perform installation testing. The TB/MTS 8000 emulates the customer’s switch/router, sends IEEE-complaint Ethernet traffic, and performs RFC 2544 tests for both end customers. This allows the service provider to consistently and repeatedly test the Ethernet traffic at every route and to save time by turning-up two customer circuits simultaneously

Buying, Selling, Trading Acterna MTS 8000

Network Element Wrap Testing
The TB/MTS 8000 Transport module also supports network element wrap testing. This enables technicians to pre-qualify a switch or router before bringing it into service. Full Gigabit Ethernet (1 GigE) throughput testing can be accomplished by connecting a single TB/MTS 8000 to two separate ports on both sides of the network element – client side and network side.

In addition, sub-rate line cards can be verified at different rates other than the network rate. For example, technicians can connect one TB/MTS 8000 port to the 10/100 Mb/s client card and the other TB/MTS 8000 port to the 1 GigE (1000 Mb/s) network card and perform throughput testing through the network element. This ensures that the network element backplane can sufficiently buffer and pass incoming traffic, without dropping any frames/packets. The TB/MTS 8000 can perform RFC 2544 testing to verify the configuration of the network element and the throughput of its line cards, as well as ensure consistent backplane functionality in both directions.

With this developing market trend, the TB/MTS 8000 Transport module is well-suited to enable technicians to use one test set to turn up services ranging from 10/100/1000 copper Ethernet, optical GigE, and optical 10 GigE – all from a single module. In addition, with its dual-port configuration, the TB/MTS 8000  provides a comprehensive and robust turn-up tool, thereby minimizing follow-on installation and maintenance issues.

If you’re selling your Acterna MTS 8000 please fill out form on the right hand side of page.