If you’re looking to Sell Anritsu MW9076C SM Fiber Optic OTDR w/ MU960003A

The MW9076 mini-OTDR series can perform a measurement three to five times faster than the well received, conventional MW9070B. Three and four-wavelength OTDRs are included among the new product lineup. The four-wavelength OTDR can measure the chromatic dispersion characteristics from one end of an optical fiber. Two types of color displays with high resolution (5cm) and many sampling points (50000 points) are available for indoor and outdoor use. The MW9076 series shows superior basic performance that enables a wide dynamic range and a short dead zone. It supports the construction and maintenance of the optical fiber cables. Moreover, using this OTDR, it is possible not only to quickly charge a lithium-ion battery but also to indicate the remaining battery charge.

High-speed measurement
It takes only 10 seconds to measure and display the waveform and connection loss on one screen. Just one press of the Start key is all that is needed to make measurements

Full automatic mode
Measurement results are displayed by simply pressing the Start key. All complicated settings of distance range, pulse width, attenuator, and maker can be automatically executed. Measurement speed in this mode was significantly increased. When the wavelengths are set to ALL, wavelengths are automatically changed.

Repeated measurement
A series of operations, such as measurement, wavelength switching, data saving, optical channel switching, and next optical fiber measurement, can be executed automatically under preset measurement conditions. This mode is ideal for measuring a multi-core optical fiber.

Waveform comparison function
Measured and saved data can be compared on the same screen. In addition, differences can be displayed as a waveform for simple observation of distance and level differences. This is useful for checking aging changes or comparing several fibers.

Buying, Selling, Trading Anritsu MW9076C

MU960003A Optical Channel Selector
The optical channel selector, a unit for connecting light that propagates through optical fibers to one of multiple optical fibers, plays a similar role to the rotary switch in the electric circuit.

MU960003A is a built-in type optical channel selector, and it can be controlled by OTDR when inserted between the OTDR main unit and the display unit. The optical channel selector is used to select the device under test.

Features:

• The optical channel selector contributes to the optical measuring systems by reducing the connection loss of light and implementing high switching reproducibility and switching life.
• Since the optical channel selector is built-in type and compact in size, it saves system space
• ST type optical connector is used for connecting the optical fiber
• MU960003A can operate only when the AC adapter is connected to the OTDR

If you’re selling your Anritsu MW9076C please fill out form on the right hand side of page.